The ECOBULL T Z2-Z22 Additive Manufacturing, from the Depureco line, is an industrial vacuum cleaner, IIIC certified, designed for the suction of conductive metal powders in the additive 3D printing industry. The ECOBULL T Z2-Z22 Additive Manufacturing, powered by a powerful ATEX-certified side channel turbine, is equipped with a sophisticated explosion-proof system for the suction of conductive metal powders, which is obtained by immersing the suction nozzle directly in a bath of inert liquid present in the container. The motor is protected by a large surface (35,000 cm2) class H13 antistatic conical filter.Filtration also takes place through a metal grid filter and a nylon filter, capable of separating the metal particles from the inert liquid, to then be recovered and reused. The liquid is discharged by gravity through a practical tap placed at the bottom of the container. The 100 Lt container is made of AISI 304 stainless steel and has a convenient inspection window on the front to check the level of the liquid inside.
SUCTION UNIT
The suction unit is a side channel blower with direct coupling between motor and impeller. The side channel blower is equipped with a safety valve to guarantee continued work in complete safety, without any maintenance. The blower is also equipped with a metal silencer to maintain a low noise level.
m_fp_1.png
FILTERING ELEMENT
The filtration is guaranteed by a sturdy polyester filtering cartridge. The cartridge is made to ensure large filter surface in a compact space. This way air can pass through when the filter is dirty too. The filter is H Class (BIA | EN 60335-2-69) certified, preserving the motors and the operator.
Inert-container_nobk
INERTING CONTAINER
IIIC-certified container with conductive metal powder inerting oil bath system. Different levels of filtration to ensure maximum safety in all areas of use.
Technical data
Motor
Type
side channel blower
ATEX marking
II 3 G/D Ex htc IIIC T140°C Gc/Dc
Voltage
400
V
IP
65
Continuous vacuum
230
mBar
Maximum air flow
340
m3/h
Safety valve
included
Noise level
72
dB(A)
Frequency
50/60
Hz
Power
4
HP
Insulation class
F
Primary Filter
Type
cartridge
Class EN 60335-2-69
H Class
Media
antistatic polyester
Machine
Suction inlet
50
Ø mm
Dimensions
660 X 800
mm
Height
1630
mm
Weight
120
Kg
Options
icon-filtrazione.svg
AVAILABLE FILTER MEDIA
hepa_14__no_x_puma_
HEPA 14
Absolute filter (EN 1822-5)
filtro_antistatico_ptfe_copia
PTFE ANT
AntistatIc PTFE filter (M class EN 60335-2-69)
STRUCTURE AND OPTIONS
Contenitore
100 Lt
100 Lt bin
Porta accessori
AB
Accessories basket
BX
BX
Stainless steel bin AISI 304
GX
GX
Stainless steel bin and chamber AISI 304
TX
TX
Stainless steel bin, chamber and frame AISI 304
