Home / Industrial vacuum cleaner / M100 JetClean® LP Cyclonic Industrial Vacuum

M100 JetClean® LP
CYCLONIC INDUSTRIAL VACUUM

Single-phase Wet&Dry Industrial Vacuum Cleaners
The M100 Jet Clean® LP is the most powerful cyclonic industrial vacuum cleaner of the single-phase series in Depureco's range. Thanks to the 3 By-Pass motors it is possible to reach the impressive power of 3.9 kW. The M65/100 Jet Clean® industrial vacuum cleaner works in all conditions: dust, chips, liquids difficult materials with hoses as long as several meters. As standard this vacuum cleaner is equipped with a 35,000 cm2 PTFE filter certified Class M by the BIA (Berufsgenossenschaftliches Institut für Arbeitssicherheit) with a filtration efficiency of 1 µ. The JetClean® filter cleaning system allows the filter to be cleaned using the pressure differential between the inside and outside of the vacuum cleaner. The tangential inlet and protective jacket of the filter cartridge allow the cyclonic effect of dust to be used to slow it down and drop it inside the container, protecting the filter. The M100 Jet Clean® LP vacuum cleaner is equipped with a Longopac system where The vacuumed material is automatically bagged. The product automatically falls into a high-strength transparent plastic disposable bag. The volume of the bag is decided by the operator who will seal and cut it without having contact with the sucked material. This makes it possible to work with fine and hazardous powders while ensuring the safety of the operator.
Power

3,9 kW

Surface

35,000 cm2

Capacity

Longopac Lt

Highlights

3_otori_bypass_monofase.png
SUCTION UNIT The vacuum is generated by 3 by-pass motors. Each motor is managed by an independent switch, permitting the operator to control the intake performance. The motors are located in a sturdy casing, with an insulating sponge to maintain a low noise level.
m_fp_1.png
FILTERING ELEMENT The filtration is guaranteed by a sturdy polyester filtering cartridge. The cartridge is made to ensure large filter surface in a compact space. This way air can pass through when the filter is dirty too. The filter is M Class (BIA | EN 60335-2-69) certified. It stops the particles till 1 micron, preserving the motors and the operator.
sistema_di_pulizia_jet_clean.png
Jet Clean® FILTER CLEANING SYSTEM The vacuum cleaner is equipped with a new cleaning system named JetClean® designed by Depureco. Thanks to the different pressure between the outside and the inside of the vacuum cleaner, the system generates a jet flow inside the cartridge, detaching the dust from the filter surface. It is a fast and efficient way to keep the filter clean during the operations, without stopping the motors.
longopack.png
LONGOPAC® The collected material is stocked inside a sturdy plastic bag named Longopac®. This bag is 20 meters long and it is rolled up at the bottom of the filter chamber. When the vacuum cleaner is stopped, the material automatically falls into the bag. When the bag is full the operator can seal it, cut it and safety store away the collected dust. Then it is possible to start with a new bag. This operation can be made without any contact between operator and material.

Technical data

Motor
Type by-pass
Voltage 230 V
Maximum vacuum 250 mBar
Maximum air flow 570 m3/h
Noise level 72 dB(A)
Engines 3
Frequency 50/60 Hz
Power 5,2 HP
Primary Filter
Type cartridge
Class EN 60335-2-69 M Class
Media PTFE
Filter cleaning Jet Clean
Filtering efficiency (IFA) IFABGIA M-PES
Machine
Suction inlet 70 Ø mm
Dimensions 660 x 800 mm
Height 1515 mm
Weight 70 Kg

Options

icon-filtrazione.svg
AVAILABLE FILTER MEDIA
p11725_cartuccia_filtro_assoluto
HEPA 14 Absolute filter (EN 1822)
28.000 cm² filter surface
H14 Class Filter (EN 1822)
Glass fiber
STRUCTURE AND OPTIONS
Contenitore
100 Lt 100 Lt bin
Porta accessori
AB Accessories basket
BX
BX Stainless steel bin AISI 304
Messa a terra completa
GRD Grounding
KDP
KDP Differential pressure KIT for bag
Longopac
LP Longopac bagging system
Ghigliottina
SD Sliding damper
Presa elettroutensile
RC Schuko Remote control by power tool (MAX 2000 W)

Accessories

p00327_spazzola_fissa_wet_dry_50mm
P00327 Wet & Dry fixed brush ø 50mm Wet & dry fixed accessory with 50 mm diameter flexible hose fitting
w and d kit 50
P11887 Wet & Dry Kit Ø 50mm Kit containing specific accessories for 50 mm diameter solids and liquids vacuuming
starter kit 50
P12350 Starter kit Ø 50mm Basic kit containing specific accessories for 50 mm diameter solids and liquids vacuuming

Request free quote

Caricamento …