Single-phase Wet&Dry Industrial Vacuum Cleaners XM35 JC LP Industrial Vacuum For Surface Preparation
Single-phase Wet&Dry Industrial Vacuum Cleaners XM35 JC LP Industrial Vacuum For Surface Preparation
XM35 JC LP is an industrial vacuum cleaner for fine dust. Two powerful single-phase motors with independent drive, large-surface cartridge filter in M-category that can be cleaned without having to turn off the vacuum cleaner with JetClean system and protected by cyclonic effect at the inlet of the vacuum cleaner. Convenient Endless Bag continuous bag collection system makes it easy to handle the vacuumed material.
- Designed for fine dust extraction
- Large surface area M-class filter with integrated Jet Clean cleaning
- Compact and easy to handle
- Endless Bag collection to avoid contact with dust
2,6 kW
Toxic or hazardous dusts
Endless bag
Technical data
| Typologies | By-pass |
| Power | 2,6 kW - 3,5 HP |
| Frequency | 50/60 Hz |
| Voltage | 230 V |
| Vacuum in continuous run | 250 mBar |
| Maximum air flow | 380 m3/h |
| Noise level | 72 dB(A) |
| Suction inlet | 50 Ø mm |
| Collection system | Endless Bag |
| Dimensions | 585 x 545 mm |
| Height | 1395 mm |
| Weight | 45 Kg |
| Primary filter type | Cartridge |
| Filter surface | 35000 cm2 |
| EN 60335-2-69 filtration class | M |
| Media | PTFE coated polyester |
| Filter Cleaning System | Jet Clean |
| JetClean Guillotine | Included |
Highlights
Suction is provided by 2 by-pass motors controlled by independent switches, allowing the operator to control suction performance. The motors are located inside a robust enclosure, with an insulating sponge to maintain a low noise level.
Filtration is ensured by a Class M polyester cartridge filter (filtration efficiency 1 micron) with a high filtering surface area, which guarantees air passage even with a dirty filter.
Equipped with JetClean® filter cleaning system. Due to the different pressure between the outside and inside of the vacuum cleaner, the system generates a flow of air through the cartridge that detaches dust from the surface of the filter, keeping the filter efficient while working and without stopping suction.
The material is collected inside a coated bin complete with a handle that allows it to be released. Thanks to the 4 sturdy pivoting wheels, the container can be moved with ease and the collected material can then be disposed of.
Features
Options
22.000 cm² filter surface
H14 Class Filter (EN 1822)
Glass fiber
35.000 cm² filter surface
H13 Class Filter (EN 1822)
Glass fiber
Accessories
