Dust extractors for toxic and hazardous dusts XFLOOR 3 PLUS Industrial Vacuum Cleaner For Construction And Surface Treatment
Dust extractors for toxic and hazardous dusts XFLOOR 3 PLUS Industrial Vacuum Cleaner For Construction And Surface Treatment
Compact and easy to transport, the XFLOOR 3 PLUS industrial fine dust vacuum cleaner is an effective combination of power, filtration efficiency and safe dust collection, ideal for providing maximum protection from dust dispersion in floor or surface treatment operations.
- Industrial vacuum cleaner for fine dust
- Tangential entry with cyclonic effect
- Large surface area filter of class M
- Endless Bag collection to avoid contact with dust
3,9 kW
Toxic or hazardous dusts
Endless bag
Technical data
| Typologies | By-pass |
| Power | 3,9 kW - 5,2 HP |
| Frequency | 50/60 Hz |
| Voltage | 230 V |
| Vacuum in continuous run | 250 mBar |
| Maximum air flow | 570 m3/h |
| Noise level | 72 dB(A) |
| Suction inlet | 80 Ø mm |
| Collection system | Endless Bag |
| Dimensions | 920 x 565 mm |
| Height | 1430 mm |
| Compact height | 1170 mm |
| Weight | 80 Kg |
| Primary filter type | Star |
| Filter surface | 45000 cm2 |
| EN 60335-2-69 filtration class | M |
| Media | Polyester |
| Filter Cleaning System | Manual |
Highlights
Suction is provided by 3 by-pass motors controlled by a single switch that allows them to start sequentially, avoiding current spikes. The motors are inside a sturdy enclosure, with an insulating sponge to maintain a low noise level.
An ergonomic manual filter shaker allows the filter to be cleaned easily and quickly, removing dust and debris from the surface of the filter.
The tangential inlet facilitates the cyclonic effect to deposit the collected material in the container. Filtration is ensured by a polyester star filter in class M (filtering efficiency 1 micron) with high filtering surface area, which guarantees air passage even with a dirty filter.
The material is collected inside a sturdy 20-meter-long adjustable roll plastic bag. Once the bag is filled, simply seal and remove it, with no contact between operator and material.
Features
Options
Accessories
